Top picks: Flying Dutchman Ultra Reverse and FOXBC pin-end blades for Delta saws.
You power up your Delta, slide in a blade, and the cut burns, chatters, or fuzzes the bottom edge. We have all been there. The right blade makes your saw feel new. It saves wood, time, and patience. I wrote this deep-dive guide to help you pick the best blades for delta scroll saw projects—clean lines, tight turns, and crisp backsides included.
FOXBC 5-Inch Scroll Saw Blade…
The product is Easy installation and easy handling, easy to use and highly durable Scroll Saw Blade for precise sawing of hard/soft wood, plastic, copper and other soft metals Made…
Ultra Reverse 60 pc Variety…
Flying Dutchman scroll saw blades are 5″ long and pinless. Milled blades, which makes a sharper cutting edge. Manufactured in Germany with top-grade high-quality hardened steel. Ultra Reverse pinless blades…
FOXBC 5 Inch Plain End…
5 Inch Plain End Scroll Saw Blade Set Includes: (12 Pack) with 28 teeth per inch, (12 Pack) with 12 teeth per inch, (12 Pack) 10 teeth per inch FOXBC…
FOXBC 5″ Pin-End Blades, 48-Pack (HCS)
These FOXBC 5-inch pin-end blades are a practical match for many Delta scroll saws that use pinned blades. The pack size is generous, which helps when you practice tight turns or cut abrasive plywood. High carbon steel keeps costs low while staying flexible under light pressure. If you want a straight swap into older Delta models, these drop in fast.
I find them reliable for softwoods and thin hardwoods. The teeth stay sharp enough for hobby use and batch runs of ornaments. They also fit several 15- to 16-inch saws from other brands, so sharing across tools is easy. If you want the best blades for delta scroll saw value in pinned style, this 48-pack is a strong start.
Pros:
- True 5-inch length fits many Delta pin-end saws
- Large 48-pack reduces mid-project runs to the store
- High carbon steel offers good flex for curves
- Quick, tool-free swaps on most pinned Delta clamps
- Solid value for practice and production cuts
Cons:
- HCS dulls faster than premium alloys
- Pin ends limit ultra-tight fretwork
- May leave light fuzz on the bottom in soft plywood
My Recommendation
This set suits beginners and budget-minded makers who want easy, pinned compatibility. If you run an older Delta that prefers pin-end blades, these are simple and consistent. They are not boutique blades, but they cut clean, track well, and install fast. For everyday use, they deliver the best blades for delta scroll saw value without fuss.
| Best for | Why |
|---|---|
| Beginners on Delta pin-end saws | Fast swaps and forgiving HCS |
| Shop practice and bulk cutting | 48-pack keeps you stocked |
| General scrollwork in softwoods | Stable tracking and smooth curves |
Flying Dutchman Ultra Reverse, 60-Pack
When I need clean backs with less sanding, I grab Ultra Reverse blades. The reverse-tooth section helps reduce fuzzing on the bottom of the cut. These are pinless blades, so they suit Delta models with plain-end clamps or those using adapters. The 60-pack variety lets you dial in tooth counts for thin veneers or thicker hardwoods.
Control is excellent, and the finish stands out. They are a favorite when I cut gifts or sellable pieces. You pay a bit more, but you save time on cleanup. For premium work, these often feel like the best blades for delta scroll saw users who want fast, crisp results.
Pros:
- Reverse-tooth action reduces bottom fuzz
- Fine control for tight interior work
- Variety pack covers multiple thicknesses
- Smooth tracking and low chatter
- Great finish quality for less sanding
Cons:
- Requires a Delta that accepts plain-end blades
- Costs more than basic HCS pinned sets
- Learning curve if moving from pin-end blades
My Recommendation
If your Delta accepts plain-end blades, this is a go-to premium pack. Choose it for furniture-grade edges and delicate fretwork. The variety mix means you can handle ornaments, intarsia, and portraits in one box. For clean, pro-level results, these feel like the best blades for delta scroll saw projects that need polish.
| Best for | Why |
|---|---|
| Fine fretwork and portraits | Excellent control and detail |
| Clean backs with less sanding | Reverse teeth reduce fuzz |
| Mixed project queues | 60-pack variety covers many cuts |
FOXBC 5″ Plain-End Set, 36-Pack (10–28 TPI)
This 36-pack from FOXBC gives you plain-end blades in three useful TPIs. If your Delta has plain-end clamps or an adapter, this set offers a balanced mix for thin to mid-stock. The 10 TPI is fast in thicker pieces. The 28 TPI helps prevent chip-out in thin veneers and acrylics.
I like the way these track in hardwoods when tension is set right. They are also easy to label and sort by TPI. If you want one box to cover day-to-day shop demands, this is it. It is a simple way to try the best blades for delta scroll saw users who run plain-end systems.
Pros:
- Three TPIs handle thin to mid stock
- Plain-end grip offers fine control
- Good value per blade
- Stable tracking in hardwoods
- Easy to organize and rotate
Cons:
- Won’t fit pin-end-only Delta models
- HCS edge life is average
- No reverse-tooth option in this pack
My Recommendation
Choose this set if you prefer the control of plain-end blades. The three TPIs are a smart starter trio for most materials. It is a low-risk way to dial in your favorite sizes. For many plain-end Delta users, these are the best blades for delta scroll saw projects on a budget.
| Best for | Why |
|---|---|
| Plain-end Delta setups | Direct fit and strong control |
| Mixed wood thicknesses | 10, 12, and 28 TPI options |
| Value-focused buyers | 36 blades, sensible price |
5″ Pin-End Scroll Blades, 60-Pack
This 60-pack of 5-inch pin-end blades targets users who want a deep bench of backups. For many Delta saws that use pin-end clamps, they drop in fast. The set typically includes a spread of TPIs for thin and thick stock. That makes it a handy kit for ornaments, puzzles, and boxes.
The pins seat well, and tension setup is simple. If you push too hard, HCS will heat and dull, so let the teeth do the work. I keep a few near the saw for fast swaps during long sessions. For sheer volume, they rank among the best blades for delta scroll saw owners who cut daily.
Pros:
- Big 60-pack for heavy use
- Pin-end convenience on Delta models
- Multi-TPI flexibility in one box
- Quick installs for batch work
- Good fit for softwood projects
Cons:
- Average edge life on abrasive plywood
- Not ideal for ultra-fine fretwork
- Quality can vary slightly between sizes
My Recommendation
Get this if you process lots of small gifts or craft fair stock. You will spend less time reordering and more time cutting. The variety helps match blade to board. For volume and convenience, they are some of the best blades for delta scroll saw setups that run pin-end only.
| Best for | Why |
|---|---|
| High-volume craft cutting | 60 blades keep work flowing |
| Pin-end Delta saws | Drop-in compatibility |
| Mixed project sizes | Assorted TPI selection |
5″ Pin-End Blades, 60-Pack (10–24 TPI)
Here’s another solid 60-pack for Delta pin-end fans. The 10–24 TPI range covers general shop tasks. I like the middle TPIs for boxes and signs, while the finer teeth help on plywood. The pins are consistent, so alignment is simple.
If you cut curves and small pockets, these stay nimble. They do not replace premium blades for ultra-clean backs, but they pull their weight. The set is a workhorse at a fair price. For many, these are the best blades for delta scroll saw projects that need variety without a high bill.
Pros:
- Wide TPI spread from coarse to fine
- Good balance of speed and control
- Consistent pin quality
- Decent life in soft and medium hardwoods
- Great value per blade
Cons:
- HCS can dull fast in dense exotic woods
- Not for reverse-tooth bottom finishes
- Less ideal for acrylics than fine, specialty blades
My Recommendation
Pick this if you want a one-box pin-end solution with clear size steps. It suits weekend projects and repeat jobs. It will not outshine top-tier plain-end blades, but it delivers. For a broad, affordable mix, these are among the best blades for delta scroll saw users who like pin-end speed.
| Best for | Why |
|---|---|
| General hobby work | Balanced 10–24 TPI choices |
| Pin-end convenience | Quick load and go |
| Budget-minded cutting | Strong cost-to-use ratio |
Flying Dutchman Spiral Blades, 60-Pack
Spiral blades cut in all directions without rotating the workpiece. That is a gift for portraits, large panels, and awkward shapes. Flying Dutchman spiral blades are pinless, so your Delta must accept plain-end blades. They feel smooth for spirals and offer a broad range for different tasks.
The finish is rougher than straight-tooth blades, but the speed of complex cuts is hard to beat. I use them when I need to steer around obstacles or keep the work flat. They reward a gentle touch and steady feed. For special tasks, they can be the best blades for delta scroll saw owners who love detailed silhouettes.
Pros:
- 360-degree cutting without rotating the board
- Great for portraits and interior cuts
- Broad size variety in one pack
- Quality steel and smooth action for spirals
- Speeds up complex, continuous lines
Cons:
- Rougher finish than straight-tooth blades
- Requires practice to control drift
- Not for pin-end-only Delta saws
My Recommendation
Choose these if you cut portraits or large, intricate outlines. They excel when turning the work is risky or impossible. Use light pressure and let the blade’s wrap do the job. For advanced profiles, they are the best blades for delta scroll saw users who love freedom in every direction.
| Best for | Why |
|---|---|
| Portraits and silhouettes | Cut in any direction |
| Large panels | No need to spin the work |
| Complex inside cuts | Easy navigation in tight spaces |
Delta #7 Super Sharps Blades
These Delta-branded #7 blades aim at users who want an OEM-style feel. The mid-size profile balances speed and control in common thicknesses. They pair naturally with Delta tension systems and guides. If you like a “factory match,” this is a familiar choice.
I reach for them when I need predictable tracking across multiple boards. They handle hardwoods well when you maintain tension. Availability can vary, so stock up when you can. For Delta loyalists, they remain the best blades for delta scroll saw cutting with a brand match.
Pros:
- Delta-branded confidence and fit
- Balanced cut for mid-thickness stock
- Predictable tracking and control
- Comfortable feel for Delta users
- Good choice for hardwood projects
Cons:
- Single size limits flexibility
- Can be pricier per blade
- Stock may be limited at times
My Recommendation
These work for users who like OEM parts and a steady, known performance. If you cut a lot of mid-thickness hardwood, they sit in a sweet spot. I keep them for repeat projects where consistency rules. For brand-aligned performance, they are the best blades for delta scroll saw owners who prefer Delta originals.
| Best for | Why |
|---|---|
| Delta purists | OEM feel and predictable fit |
| Mid-thickness hardwoods | Balanced speed and control |
| Repeat production jobs | Consistent tracking over time |
YullSorom 5″ Pin-End Blades, 48-Pack (HCS)
YullSorom’s 48-pack offers four useful TPIs: 10, 15, 18, and 24. That covers quick rips to fine edges in thin stock. The pin ends fit many Delta saws for fast changes. For craft runs and weekend builds, this set is easy to sort and use.
The blades feel light and responsive on curves. The finer 24 TPI helps calm plywood tear-out. Keep feed rates modest and let the teeth slice, not burn. If you want simplicity with variety, these are among the best blades for delta scroll saw users who stick to pinned systems.
Pros:
- Four TPIs for flexible cutting
- Pin-end convenience for Delta users
- Good for softwoods and thin hardwoods
- Easy to keep sizes straight
- Budget-friendly 48-pack
Cons:
- Not as durable in dense exotic woods
- No reverse-tooth option
- Less ideal for plastics without fine control
My Recommendation
If your Delta thrives on pin-end blades, this is a smart mix. It covers most common shop tasks without waste. You will find a size that suits each board on your bench. For practical variety, they rank with the best blades for delta scroll saw cutting at a sensible price.
| Best for | Why |
|---|---|
| All-around pin-end use | Four TPIs for common needs |
| Curvy patterns | Good flex and control |
| Budget shops | 48 blades at a fair price |
SKIL Scroll Saw Blade Set, 18-Piece
This compact 18-piece SKIL set is a sampler for light-duty cutting. It gives you a taste of different sizes without a big buy-in. If you are new to scrolling or tuning a Delta saw, a small kit reduces risk. It also helps you test which TPI matches your favorite stock.
It is not a high-volume set, but it is handy for trial runs and small jobs. I keep a small pack like this to demo cut quality on new woods. Confirm whether your Delta needs pin-end or plain-end before you buy. For quick tests, these can still be the best blades for delta scroll saw users finding their groove.
Pros:
- Great starter or testing kit
- Low cost of entry
- Good for dialing in TPI preferences
- Brand-name reliability
- Easy to store and manage
Cons:
- Only 18 blades—won’t last long
- Limited size variety compared to bigger packs
- May not match pin-end-only Delta models
My Recommendation
Try this if you are starting out or testing wood and patterns. It is a low-commitment way to learn blade behavior. After that, you can scale into bigger sets. For exploration, these help you pick the best blades for delta scroll saw projects you plan next.
| Best for | Why |
|---|---|
| Beginners | Small pack to learn TPIs |
| Test cuts | Quick trials on new woods |
| Light-duty work | Handy for small projects |
FOXBC 5″ Pin-End Set, 36-Pack (15–20 TPI)
This FOXBC pack targets the sweet spot between speed and smoothness. At 15, 18, and 20 TPI, it suits thin to mid stock without much fuss. Pin-end fit makes blade changes quick on many older Delta saws. I use these sizes often on boxes, plaques, and signs.
Tracking is steady if you keep tension consistent and feed slow. The 20 TPI helps on thinner plywood, while 15 TPI eats through poplar and pine. This is a lean, efficient mix with no odd sizes. For daily cuts, these feel like the best blades for delta scroll saw hobby work.
Pros:
- Three everyday TPIs that matter
- Pin-end speed for quick swaps
- Good balance of control and tempo
- Works well on thin plywood
- Quality-to-price is strong
Cons:
- Doesn’t include very fine or very coarse blades
- No reverse-tooth options
- HCS edge life is average on abrasive sheets
My Recommendation
Pick this if you cut common shop woods and enjoy pin-end convenience. The three TPIs keep choices simple and useful. It is an efficient pack for daily builds and gifts. For practical everyday projects, these are among the best blades for delta scroll saw users who prefer focus over clutter.
| Best for | Why |
|---|---|
| Boxes and plaques | Balanced 15–20 TPI range |
| Pin-end Delta saws | Fast blade changes |
| Thin plywood | Cleaner edges at 20 TPI |
FAQs Of best blades for delta scroll saw
Do Delta scroll saws use pin-end or plain-end blades?
It depends on the model. Many older Delta saws use pin-end blades. Newer or pro models often accept plain-end. Check your manual or clamps before buying.
What blade length fits a Delta scroll saw?
Most Delta scroll saws use 5-inch blades. This is the standard length for both pin-end and plain-end types.
Which TPI should I choose for hardwood?
Use mid-to-fine TPIs, often 12–20 TPI, for control and cleaner edges. Coarser blades cut faster but can tear out.
Are reverse-tooth blades worth it?
Yes, if you want cleaner backs with less sanding. They reduce bottom fuzz, which helps on thin plywood and veneers.
Can I use spiral blades on my Delta?
If your saw accepts plain-end blades, yes. Spiral blades cut in all directions but leave a rougher edge.
Final Verdict: Which Should You Buy?
The Flying Dutchman Ultra Reverse 60-Pack is my top pick for clean backs, control, and variety. If you need pin-end convenience, the FOXBC 5″ Pin-End Blades 48-Pack is an easy, high-value choice.
Both deliver the best blades for delta scroll saw results in their categories. Match blade type to your Delta clamps, and you will cut cleaner, faster, and happier.