The best metal blades for scroll saws pair high TPI with durable steel.
You’ve got a tight curve to cut in thin brass, and your wood blade is chattering, burning, and shredding edges. I’ve been there. Picking the best metal blades for scroll saw turns sharp corners into smooth lines, reduces burrs, and saves your patience. With the right TPI, steel type, and tooth pattern, you can cut aluminum, brass, copper, and even thin steel with control. In this guide, I break down real-world picks that bite clean, stay sharp longer, and fit popular saws. I’ll help you match blade to metal, so your next cut feels easy, safe, and precise.
FOXBC 5-Inch Scroll Saw Blade…
The product is Easy installation and easy handling, easy to use and highly durable Scroll Saw Blade for precise sawing of hard/soft wood, plastic, copper and other soft metals Made…
FOXBC 5 Inch Plain End…
5 Inch Plain End Scroll Saw Blade Set Includes: (12 Pack) with 28 teeth per inch, (12 Pack) with 12 teeth per inch, (12 Pack) 10 teeth per inch FOXBC…
FOXBC Spiral Scroll Saw Blades…
5 Inch plain end spiral scroll saw blade in all directions and have 360 cutting capability Cutting speed and finish depend on material thickness and number of teeth per inch…
FOXBC 5-In Pin-End Blades, 48-Pack
This FOXBC 48-pack offers pin-end blades for 15–16 inch scroll saws like WEN, Dremel, and Craftsman. They are high-carbon steel and aimed at wood, but the finer TPIs can score thin non-ferrous metals with care. If you run a pin-end saw and need bulk blades that fit fast, this pack keeps you stocked. The steel has a fair balance of flex and bite for hobby tasks.
For metal, I treat these as a “light-duty” option. Use the highest TPI available in the pack when cutting aluminum or brass sheet. Drop your saw speed, add a touch of cutting wax, and use a firm hold-down. You’ll get through small brackets or jewelry blanks while keeping costs low.
Pros:
- Large 48-pack covers lots of practice and projects
- Pin-end format fits many budget and mid-range saws
- Good for quick swaps and reduced setup time
- Affordable for beginners testing techniques
- Works on thin non-ferrous metals at low speed
Cons:
- Designed mainly for wood, not ideal for hard steels
- Pin-end limits ultra-fine tensioning compared to plain-end
- Edge life shortens fast on thick metal
My Recommendation
This is best for new users with pin-end saws who want a budget path into metal practice. If you want the best metal blades for scroll saw projects and have only pin-end clamps, this set can help you learn feeds, speeds, and lubrication on thin metals. It is not a pro metal solution, but it is a cheap and cheerful way to start.
| Best for | Why |
|---|---|
| Beginners on pin-end saws | Inexpensive bulk pack to learn control |
| Thin aluminum and brass | Higher TPI options reduce snagging |
| Mixed shop tasks | Useful on wood, plastics, and craft metals |
FOXBC 5-In Plain-End Set, 36-Pack
This 36-pack includes plain-end blades in 10, 12, and 28 TPI. For metal, the 28 TPI is the hero. It handles thin aluminum, brass, and copper with fewer grabs and a neater edge. The plain-end design also lets you dial in better tension, which is key for straight tracking on metal.
I like this set as a starter bundle for shops that cut various materials. Use 28 TPI for sheet metals, 12 TPI for acrylics, and 10 TPI for woods. On metal, slow the stroke rate, secure the work with a hold-down, and use a light lubricant. With this approach, the 28 TPI blades feel close to the best metal blades for scroll saw work at this price.
Pros:
- Includes 28 TPI for thin metal work
- Plain-end allows precise tension tuning
- Versatile pack for mixed materials
- Good bite-to-flex balance in HCS
- Budget-friendly for daily shop use
Cons:
- No ultra-fine 32–40 TPI for very thin steel
- HCS dulls faster than bi-metal on hard metals
- Limited tooth styles in the mix
My Recommendation
Choose this if you need one set to cover metal and more. The 28 TPI blades cut non-ferrous sheet cleanly and are easy to control. If you want the best metal blades for scroll saw projects under a tight budget, this pack is a strong value pick. Keep your cuts cool, slow, and steady for the best finish.
| Best for | Why |
|---|---|
| General shop work | Three TPIs suit wood, plastic, and metal |
| Thin non-ferrous metals | 28 TPI reduces burrs and catches |
| Users with plain-end saws | Improved tension for straighter cuts |
FOXBC Spiral #3 Metal Cutting Blades
Spiral blades cut in any direction, and this #3 size is tuned for metal cutting. They shine on intricate scroll patterns where you cannot rotate the work. I use them for brass filigree and detailed inlays. You get 360-degree cutting, but you must manage heat and feed pressure with care.
The trade-off with spiral blades is surface finish. They tend to leave more burrs than straight-tooth blades. For the best metal blades for scroll saw detail work, these are hard to beat if you value agility over finish. A quick file or deburr tool brings edges to a smooth feel afterward.
Pros:
- Cut in any direction without turning the workpiece
- Great for tight internal curves and patterns
- #3 size balances speed and control on thin metals
- Plain-end fits tension clamps well
- Useful for jewelry, model parts, and filigree
Cons:
- Rougher finish than straight-tooth blades
- More heat; needs slow strokes and lube
- Steeper learning curve for steady control
My Recommendation
Pick these if you cut complex shapes in thin brass or aluminum and want fluid, 360-degree motion. These feel like the best metal blades for scroll saw artists who prize movement and curve freedom. Expect to spend a minute on cleanup, and you’ll love the patterns you can make.
| Best for | Why |
|---|---|
| Intricate scroll patterns | All-direction cutting without reorienting |
| Jewelry and crafts | Fine control on thin metals |
| Small workshop saws | Plain-end tensioning for stable tracking |
Spiral 5-In #1 Fast Metal Cutting
These #1 spiral blades are tuned for faster metal cutting with a small kerf. They eat through thin aluminum and brass quickly. The spiral form makes curve work simple, and you can change direction without stopping. I find them best for speed when a small project needs lots of short, curved cuts.
As with any spiral, surface burrs increase. Plan for light sanding or a deburr pass. Keep stroke speed modest, and apply cutting wax to control heat. If you want the best metal blades for scroll saw speed in thin metals, these #1 spirals deliver a zippy, responsive feel.
Pros:
- Fast feed on thin non-ferrous metals
- Small kerf for tighter radius cuts
- Great for curves and pattern work
- Plain-end setup for fine tension control
- Good value for frequent craft work
Cons:
- More burrs than straight-tooth blades
- Not ideal for thicker or hard steel
- Heat buildup if run too fast
My Recommendation
Choose these for speed and curves in aluminum and brass sheets. They feel like the best metal blades for scroll saw crafters who want to move fast with less workpiece turning. Just budget a moment to clean edges, and you’ll enjoy quick, precise results.
| Best for | Why |
|---|---|
| Fast curved cuts | Spiral teeth bite in any direction |
| Thin aluminum, brass | Quick feed with a neat kerf |
| Pattern-heavy projects | Less time stopping to reorient stock |
Proxxon 28745 5-In Pin-End 25 TPI
Proxxon’s 25 TPI pin-end blades are a solid fit for scroll saws that do not accept plain-end clamps. The 25 TPI spacing gives a smoother metal cut than coarse wood blades. On thin soft metals, they track well if you keep feed pressure gentle. The pin-end makes swaps fast on saws like WEN and Ryobi.
These are a practical step up for metal on a pin-end machine. For thin steel, go very slow, use oil, and keep the work locked down. They may not match pro-grade bi-metal performance, but they are reliable and accessible. They help bridge the gap to the best metal blades for scroll saw users locked into pin-end formats.
Pros:
- 25 TPI helps reduce grabbing on metal
- Pin-end for quick changes on compatible saws
- Predictable tracking on thin stock
- Decent life on soft metals with lube
- Good brand support and consistency
Cons:
- Pin-end limits fine-tension accuracy
- Not ideal for thicker steel
- HCS edge life trails bi-metal blades
My Recommendation
Have a pin-end saw and cut light metal often? This Proxxon pack is a smart pick. It gets you closer to the best metal blades for scroll saw precision without upgrading your clamps. Use proper speed and lube, and your thin metal work will look much cleaner.
| Best for | Why |
|---|---|
| Pin-end users | Direct fit with simple changes |
| Thin brass and aluminum | 25 TPI reduces catches and tear-out |
| Hobby shop metal cuts | Reliable, repeatable results |
Spiral 5-In #3 Metal Cutting
This #3 spiral set is built for metal and offers a steady, controlled bite. It slices thin non-ferrous sheets with ease and grants freedom on curves. For scroll artists, that means less table gymnastics. I like using a moderate stroke speed with a wax stick to hold a clean line.
Expect a slightly rough edge you can tune with a file or scotch-brite. The #3 size is a sweet spot for both speed and control. If you want the best metal blades for scroll saw finesse in curves, this set earns a spot in your drawer. It makes pattern work feel natural.
Pros:
- All-direction cutting for free-flowing curves
- #3 balances feed rate and detail
- Plain-end tensioning keeps tracking steady
- Works well with cutting wax or oil
- Good value for frequent pattern work
Cons:
- Edge cleanup is part of the process
- Less suited to very thick or hard metals
- Requires patient speed control
My Recommendation
Buy this if your metal work favors curves and tight turns. You’ll get close to the best metal blades for scroll saw shaping, with only light finishing needed. For flat lines and minimal burrs, pair it with a straight-tooth high-TPI option in your kit.
| Best for | Why |
|---|---|
| Curved scroll patterns | Spiral teeth cut in any direction |
| Non-ferrous metal sheets | Smooth tracking, good bite |
| Detail hobby projects | Easy control in fine work |
50-Pack 5-In Pinless HCS, 10–28 TPI
This 50-pack gives you a deep bench of pinless blades in 10–28 TPI. For metal, again, the 28 TPI is the focus. The big pack size is perfect for classes, makerspaces, and heavy practice. You can afford to swap blades often and keep your cut quality sharp.
The plain-end format lets you fine-tune tension for straight lines. Use the 28 TPI on thin metals with light oil. The 10 and 12 TPI are great for wood and plastics. If you want the best metal blades for scroll saw work while staying within a tight budget, this big pack delivers sheer value.
Pros:
- Huge 50-pack for busy shops
- Includes 28 TPI for thin metal
- Plain-end for precise tension
- Great cost per blade
- Good for classes and group projects
Cons:
- No ultra-fine TPIs for razor-thin steel
- HCS is not as durable on hard metals
- Limited tooth-style variety
My Recommendation
Pick this if you need volume and versatility. It shines in settings where many people cut many materials. The 28 TPI blades perform close to the best metal blades for scroll saw practice on thin, soft metals, and the price makes frequent changes easy.
| Best for | Why |
|---|---|
| Busy shops and classes | 50-pack keeps projects moving |
| Budget-conscious users | Low cost per blade |
| Mixed materials | TPIs cover wood, plastic, and metal |
Spiral 5-In #2 Fine Metal Cutting
The #2 spiral is a fine-cut variant for metal patterns. It tracks tighter curves than larger spirals and leaves a slightly better edge. It is still a spiral, so plan for cleanup. I like it for delicate filigree and small internal cuts where finish matters a bit more.
Run it at a gentle pace with cutting wax. Keep your fingers light and let the teeth do the work. If your art needs both curve freedom and a neater edge, this feels like one of the best metal blades for scroll saw finesse in the spiral family. A handy middle ground for craft metalwork.
Pros:
- Finer spiral for improved edge quality
- Strong on tight curves and details
- Plain-end for controlled tension
- Good for brass and copper patterns
- Less aggressive, easier to steer
Cons:
- Still needs deburring
- Slower feed than larger spirals
- Not suited to thick steel
My Recommendation
Choose this if you want spiral agility with a better finish. For jewelry, nameplates, and small inlays, it moves well and cleans up fast. If your goal is the best metal blades for scroll saw curves with tidy edges, this #2 spiral is a smart pick.
| Best for | Why |
|---|---|
| Delicate curves | Fine spiral teeth and small kerf |
| Brass and copper | Controlled bite with less chatter |
| Artistic inlays | Balance of agility and finish |
YullSorom 5-In Pin-End 48-Pack, Mixed TPI
This pin-end 48-pack by YullSorom includes 10, 15, 18, and 24 TPI. While they’re positioned for wood, the 24 TPI blades can handle thin aluminum and brass with care. If you have a pin-end saw, this pack offers a good spread for learning metal technique. The pin design makes blade swaps quick.
On metal, focus on the highest TPI and use oil. Clamp your stock and lower your speed to avoid heat. It’s a budget way to test metal cuts before buying dedicated metal-only blades. In a pinch, the highest TPI here can pass for the best metal blades for scroll saw learners who are tied to pin-end blades.
Pros:
- 48 blades help you practice and refine skills
- Pin-end convenience on compatible saws
- 24 TPI option for thin soft metals
- Good price-to-quantity value
- Mixed TPI also covers wood and plastics
Cons:
- Not ideal for thick or hard metals
- Finish may need more cleanup
- Pin-end limits precision tensioning
My Recommendation
Get this if you own a pin-end saw and want a low-cost way to try cutting light metals. It is a flexible starter pack. While not the absolute best metal blades for scroll saw mastery, it offers an easy path to learn control, speed, and lubrication on thin sheets.
| Best for | Why |
|---|---|
| Pin-end users on a budget | High blade count, fair performance |
| Thin non-ferrous metals | 24 TPI reduces grabbing |
| Mixed shop projects | Good for wood and plastic too |
How to Choose the Best Metal Blades for Scroll Saw
When metal meets a scroll saw, the blade matters most. Here is how I sort picks fast and smart. This simple method has saved me ruined blanks and hours of cleanup.
- TPI: For metal, use 20–28 TPI for thin non-ferrous sheets. Go even higher for ultra-thin stock. More teeth per inch means smoother cuts and less grabbing.
- Tooth style: Straight-tooth delivers the cleanest line. Spiral blades cut in any direction, great for curves, but they leave more burrs.
- Blade width and kerf: Narrower blades turn tighter. Use smaller sizes for fine patterns and keep kerf thin for delicate parts.
- Material: High-carbon steel (HCS) is common and affordable. Bi-metal or HSS lasts longer on steel but may be harder to find for scroll saws.
- End type: Plain-end allows finer tension control. Pin-end is quicker to change but limits precision slightly.
To get results that feel like the best metal blades for scroll saw projects, I slow the saw, reduce feed pressure, add wax or oil, and clamp work tight. For thin steel, I go very slow. For brass and copper, I aim for smooth, steady strokes. These small habits make a big difference.
Technique Tips for Cleaner Metal Cuts
Good blades shine with good habits. These quick tips lift your results and extend blade life.
- Use a zero-clearance table insert to support thin sheets and reduce chatter.
- Mask both sides with blue tape before cutting to limit scratches and burrs.
- Apply cutting wax or a drop of light oil to reduce heat and extend edge life.
- Let the blade do the work. Too much feed pressure bends teeth and roughens edges.
- Deburr with a fine file or scotch-brite wheel for a clean, safe edge.
With the right touch, even budget sets can act like the best metal blades for scroll saw projects. Small steps, big gains.
FAQs Of best metal blades for scroll saw
What TPI is best for cutting metal on a scroll saw?
For thin non-ferrous metals, 24–28 TPI works well. For ultra-thin sheets, go higher. Use slow speed and light oil.
Can I cut steel with a scroll saw?
Yes, but stick to very thin steel. Go slow, use high TPI, and lubricate. Expect faster blade wear than with aluminum or brass.
Are spiral blades good for metal?
They excel at curves and tight patterns. They leave more burrs, so plan to deburr after cutting.
Pin-end or plain-end for metal?
Plain-end allows finer tension for clean tracking. Pin-end is faster to swap but slightly less precise.
How do I reduce burrs on metal cuts?
Use higher TPI, slower speed, light lube, and steady feed. Deburr with a file or scotch-brite after.
Final Verdict: Which Should You Buy?
If you want the best balance for thin metal, pick the FOXBC 5-In Plain-End Set, 36-Pack, and lean on the 28 TPI. For intricate curves, add a Spiral #2 or #3 metal-cutting set.
With smart speed, lube, and tension, these feel like the best metal blades for scroll saw users who want smooth lines and clean edges on a fair budget.