The best spiral scroll saw blades are sharp, stable, and match your material.
You know that feeling when a tight inside cut fights you at every turn? The work burns, the line drifts, and the blade snaps right at the kerf. Spiral blades fix that stress. They cut in any direction without you spinning the board. That means smoother lines, cleaner inlays, and less time sanding. I wrote this guide to help you pick the best spiral scroll saw blades for your saw, your wood, and your goals. If you want speed, control, or budget wins, I break it all down in simple words you can trust.
Flying Dutchman Spiral Five Dozen…
Flying Dutchman scroll saw blades are 5″ long and pinless. Milled blades, which makes a sharper cutting edge. Manufactured in Germany with top-grade high-quality hardened steel. These are top quality…
FOXBC Spiral Scroll Saw Blades…
5 Inch plain end spiral scroll saw blade in all directions and have 360 cutting capability Cutting speed and finish depend on material thickness and number of teeth per inch…
Cunyuer Spiral Scroll Saw Blades…
Suggestion: It is recommended to use # 1, # 2, # 3 saw blades to saw metal. # 4, # 5, # 6, # 7 are suitable for cutting wood….
Flying Dutchman Spiral Variety Pack, 60 Blades
This Flying Dutchman spiral pack is a favorite in my shop. You get five dozen pinless blades in a true variety of sizes. The steel is tough and holds an edge under steady feed. I like them for fretwork, portraits, and tight inside corners that do not allow a turn.
The set lets you test a range before you commit to a single size. That is perfect if you move between 1/8-inch ply and 3/4-inch hardwood. The cut feels smooth, and the vibration stays low when your tension is right. If you want the best spiral scroll saw blades to cover many tasks, start here.
Pros:
- Big variety of sizes for wood from thin to mid-thick
- Pinless ends fit most modern scroll saws
- Clean cut lines with less turning of the work
- Holds sharpness well under steady pressure
- Great value per blade in a 60-pack
Cons:
- New users may need time to control the 360° cut
- Spiral blades can leave a wider kerf than straight blades
- Not ideal for saws that only accept pin-end blades
My Recommendation
If you want a complete starter set with pro-level steel, this is the one. It suits mixed projects, gifts, and craft fair stock. You can dial in size by feel before buying singles. For many hobbyists, this pack is the best spiral scroll saw blades option to learn and grow.
| Best for | Why |
|---|---|
| All-around cutting | Wide size range covers thin ply to hardwood |
| Learning spiral control | Try different sizes to find your sweet spot |
| Value hunters | High blade count lowers cost per cut |
FOXBC #4 Spiral Blades, Plain End
These FOXBC #4 spiral blades aim at fast wood cutting. The plain ends fit most 5-inch pinless scroll saws. I reach for #4 when I need a balance of control and speed in 1/4 to 1/2-inch stock. The cut exits clean when I keep the feed smooth.
The steel is consistent, so you feel less chatter at the table. The teeth bite in every direction, which makes inside pierce cuts easy. If you do word art or signs, this size lands well. It is a straight pick if you want one size from the best spiral scroll saw blades list for day work.
Pros:
- Sweet spot size for many wood jobs
- Fast feed without wild wandering
- Plain end fits a broad range of saws
- Good durability for the price
- Easy to learn compared to tiny spirals
Cons:
- Not fine enough for ultra-thin veneers
- Can fuzz softwoods without backing board
- Still leaves a wider kerf than a standard blade
My Recommendation
Pick this for signs, puzzles, and bold patterns. It is great when you want less blade change time. If you want speed with fair detail, this FOXBC is a strong bet. It earns a spot among the best spiral scroll saw blades for daily shop cuts.
| Best for | Why |
|---|---|
| 1/4–1/2 inch wood | Good bite with controllable feed |
| Word art | Maneuvers letters without turning the work |
| Budget-conscious users | Solid life-to-cost ratio |
Cunyuer #5 Spiral Blades, 12-Pack (5-Inch)
The Cunyuer #5 spiral set targets wood, metal, and plastic. I like #5 for slightly thicker hardwoods and for mixed media tests. The teeth are fine enough to steer, but strong enough to keep moving. This size works when a #4 feels loose on thick stock.
For jewelry makers and hobby carvers, the 12-pack is a nice trial size. It helps you gauge how a #5 handles brass, acrylic, and walnut. For metals, use a slow feed and a touch of lube. If you want one set to test across materials, add it to your best spiral scroll saw blades shortlist.
Pros:
- Versatile size for medium hardwoods
- Capable on thin metals with care
- Better line control than very coarse spirals
- Plain end fits common 5-inch scroll saws
- Good sampler for mixed media work
Cons:
- Metals need slow speed and lubricant
- Finer detail may favor a #2 or #1 size
- Pack count is small for heavy production
My Recommendation
Choose this set if you switch from wood to soft metals or acrylic. It offers a friendly #5 profile that many users control well. If your projects span gifts, jewelry, and decor, this fits. It could be the best spiral scroll saw blades pick when you want one pack to do most jobs.
| Best for | Why |
|---|---|
| Mixed media | Works on wood, plastic, soft metals |
| Medium hardwoods | Tighter control than coarser spirals |
| Small batch makers | 12-pack is a smart test size |
FOXBC 5-Inch Pin-End Blades, 48-Pack
Some saws only take pin-end blades. If that is your saw, this FOXBC pack is a solid match. You get 48 high carbon steel blades that fit WEN 3921/3923 and similar. While these are not spiral, they are a reliable option when your clamps demand pins.
The cut is straight and stable in softwoods and many hardwoods. The pack size is generous for practice and projects. If you plan to switch to spiral later, these hold you over now. For owners of pinned saws, this sits near the top in value, even among the best spiral scroll saw blades articles that note pin-end needs.
Pros:
- Works with WEN, Dremel, Craftsman, and more
- High carbon steel holds up for many cuts
- Great bulk count for regular use
- Quick blade changes on pin-end saws
- Consistent straight kerf
Cons:
- Not spiral; you must still turn the work
- Pin-end limits very tight inside pierce cuts
- Less detail freedom than pinless spirals
My Recommendation
If your saw requires pin-end blades, grab this pack. It gets you cutting with strong, ready stock. You can still do clean work with sharp lines. For pinned users, this is the best “for now” buy in a guide about the best spiral scroll saw blades.
| Best for | Why |
|---|---|
| Pin-end only saws | Exact fit for many 15–16 inch models |
| Bulk value | 48-pack stretches your budget |
| Straight patterns | Stable, predictable kerf |
WEN #2 Spiral Pinless 5-Inch, 12-Pack
The WEN BLX241 #2 spiral blades run at 41 TPI. That fine tooth count makes clean edges on thin woods and plastic. I use sizes like this for portraits, puzzles, and delicate inlay paths. The pinless ends fit standard clamps.
The cut is gentle, so thin stock will not chip as fast. Keep the feed slow and steady. Let the teeth do the work. If you want detail first, this WEN set belongs on your best spiral scroll saw blades radar.
Pros:
- Fine TPI for smooth edges
- Good for thin plywood and veneers
- Plain end fits many saws
- Ideal for detailed fretwork
- Predictable tracking with light feed
Cons:
- Not fast on thicker hardwood
- Requires patience to avoid heat build-up
- 12-pack can run out quick in large builds
My Recommendation
Reach for this when detail beats speed. It is a fine choice for portraits and puzzle edges that need less sanding. If you want crisp lines in thin stock, this pack is a smart buy. It earns its space among the best spiral scroll saw blades for delicate work.
| Best for | Why |
|---|---|
| Thin wood and veneers | 41 TPI reduces chip-out |
| Photo portraits | Tight control in small cuts |
| Inlays | Clean edges with less sanding |
Flying Dutchman New Spiral Variety, 60 Blades
This “New Spiral” Flying Dutchman pack gives you another five dozen pinless blades. The lineup favors smooth cuts and long life. I feel a slight edge in bite compared to many generics. The fit in the clamp is crisp and repeatable.
Use the finer sizes for portraits and the larger for speed in signs. The steel treats tension well, so fewer breaks if you set it right. For anyone who works big batches, a 60-pack saves time and money. It is tough to beat in a hunt for the best spiral scroll saw blades that last.
Pros:
- Quality steel with steady sharpness
- Strong size variety for task matching
- Pinless ends seat well in clamps
- Good feel and low chatter
- Great bulk value for serious makers
Cons:
- Upfront cost is higher than small packs
- Beginners may not need all sizes
- Still wider kerf than flat blades
My Recommendation
Pick this pack if you cut weekly or sell your work. It supplies a stable stock of sizes without fear of a bad batch. For me, it is a set-and-forget buy. It stands among the best spiral scroll saw blades for quality and range together.
| Best for | Why |
|---|---|
| High output shops | 60 blades reduce reordering |
| Mixed tasks | Fine-to-coarse sizes included |
| Consistent fit | Reliable clamping and tension |
12-Pack #5 Spiral Blades for Jewelry
This 12-pack of #5 spiral blades focuses on jewelry, wood, and small craft cuts. The size helps when curves are tight but you still need bite. I used sets like this on brass charms and thin hardwood pendants. It rewards a light, steady feed and a calm hand.
The price sits on the friendly side for tests and practice. It is a simple way to try #5 without a huge pack. Keep a scrap board under thin stock to reduce fuzz. If you want budget picks among the best spiral scroll saw blades, this one is worth a look.
Pros:
- Affordable test pack
- #5 size balances bite and steer
- Good for brass, wood, and acrylic
- Plain end fits many saws
- Low risk for beginners
Cons:
- Steel life can vary pack to pack
- Not ideal for thick hardwood
- Limited count for frequent makers
My Recommendation
Try this if you want a low-cost entry into #5 spirals. It is a match for jewelry and small decor. You can learn the feel before buying premium packs. For budget needs, it earns a slot among the best spiral scroll saw blades to sample.
| Best for | Why |
|---|---|
| Jewelry work | Clean curves on small parts |
| New spiral users | Low cost, low risk test |
| Craft projects | Enough bite for thin hardwood |
Murtenze #5 Spiral Blades, 12-Pack
The Murtenze #5 set is billed for fast wood cutting. It sits in the mid-size range most hobbyists like. I find it steady on 1/4 to 1/2-inch softwood and many hardwoods. It helps when you want progress without a fight.
The pack size is small, but fair for trial runs. The blades do best when your tension and speed match. Keep your fingers light on the work and let it glide. When you search for the best spiral scroll saw blades that are simple and fast, this one fits.
Pros:
- Good speed in softwoods
- Control stays reasonable in curves
- Plain-end fit is easy
- Solid feel at the table
- Budget-friendly 12-pack
Cons:
- Not for ultra-fine fretwork
- Life varies based on feed technique
- Smaller pack for heavy shop use
My Recommendation
Use this if you want a fast mid-size spiral for common woods. It is a good pick for plaques and quick gifts. You get speed without a harsh learning curve. In that space, it ranks with the best spiral scroll saw blades for everyday cuts.
| Best for | Why |
|---|---|
| Plaques and signs | Fast feed through softwood |
| General hobby work | #5 balances speed and control |
| Budget builds | Low cost per pack |
Hordion #5 Spiral Blades, 12-Pack
Hordion’s #5 spiral set targets wood, metal, and plastic. The cut is smooth when you keep speeds modest. I see the best results in hardwood up to 1/2 inch and on thin brass with lube. The plain ends seat well if your clamps are clean.
This 12-pack is a nice add-on for crafters. If you cut a few gifts a month, it will last. Keep a sharp eye on heat in metals. If you want balanced, low-cost picks in the best spiral scroll saw blades, it checks the box.
Pros:
- Does well on small brass pieces
- Stable path through hardwood
- Decent life at a fair price
- Pinless fit for common saws
- Good starter for mixed cuts
Cons:
- Not as long-lived as premium brands
- Metal cutting needs slow, careful feed
- Limited pack size for heavy workloads
My Recommendation
Pick this if you want budget-friendly #5 spirals that behave. It works for weekend builds and light jewelry tasks. Add a drop of lube on metals to keep it cool. It counts among the best spiral scroll saw blades if you value cost and control.
| Best for | Why |
|---|---|
| Weekend projects | Affordable and capable |
| Thin brass | Fine teeth handle small parts |
| New spiral users | Manageable learning curve |
FOXBC #1 Spiral Blades, Plain End (Metal)
When I cut thin metal, I go fine. These FOXBC #1 spiral blades target fast metal cutting in light stock. The small teeth help avoid tearing thin sheet while keeping a path. Use a light feed and a wax or drop of oil.
They also work on acrylic when you need crisp curves. Slow the strokes and let the blade cool between passes. The plain ends fit most 5-inch clamps. If you handle jewelry metals or small chassis parts, this set ranks in the best spiral scroll saw blades for fine metalwork.
Pros:
- Fine teeth for thin metals
- Good control on acrylics
- Plain-end fit is simple
- Reduces snags on delicate edges
- Useful for micro curves
Cons:
- Not fast on thick hardwood
- Needs lube and patience on metals
- Shorter life if overheated
My Recommendation
Choose this if metal is on your bench. It cuts thin brass, copper, and aluminum with less fuss when you go slow. For delicate parts, the #1 tooth count shines. It earns a place in any best spiral scroll saw blades lineup focused on metal detail.
| Best for | Why |
|---|---|
| Thin metals | Fine teeth prevent grab and tear |
| Acrylic curves | Clean edges at slow speed |
| Intricate detail | Small kerf feel for tight paths |
FAQs Of best spiral scroll saw blades
What makes spiral blades different from standard blades?
Spiral blades have teeth around the whole blade. They cut in any direction. You move the piece less. Tight inside cuts feel much easier.
Which size spiral blade should I use for hardwood?
For 1/4 to 1/2 inch hardwood, try #3 to #5. Go finer for very thin stock. Go coarser if the wood is thick and you need speed.
Do spiral blades leave a wider kerf?
Yes, most do. The kerf is often wider than a flat blade. Use a fine size for tight fits or inlay lines.
Can I cut metal with spiral blades?
Yes, with care. Use a fine size like #1 or #2. Slow down, add lube, and keep the blade cool.
Why do my spiral blades break?
Common reasons are low tension, pushing too hard, and heat. Raise tension, use steady feed, and match size to the stock.
Final Verdict: Which Should You Buy?
If you want one set that does almost everything, the Flying Dutchman Spiral Variety Pack is my top pick. It offers range, life, and control. It belongs on any list of the best spiral scroll saw blades.
For detail in thin stock, choose the WEN #2 Spiral. For mid-size speed on wood, FOXBC #4 Spiral works great. These three cover most needs and keep you focused on the cut.